Industrial Wide 5X5 consists of 5x5 Timepix tiles. Each Timepix tile is consists of an edgeless silicon sensor. The edgeless sensor technology allows placing all tiles tightly together from all sides. Thus the whole imaging area of the camera is fully sensitive to the radiation - there are no gaps between the tiles in the image. The camera is made robust to address industrial users.
The minimum detectable is typically 5 keV in case of X-ray photons. The intrinsic spatial resolution of the camera is defined by pixel size which is 55 µm. The pixels situated on the border of tiles are 2.5 times larger in one direction. The corner pixels of tiles are 2.5 times larger in both directions.
The camera is connected to the controlling computer via USB 2.0 cable with readout time of 0.65 seconds per frame. The thermal stabilization of the camera is in dependence on environment provided by an active water cooling system with chiller. The power consumption is 25 W.
Model WIDEPIX 5X5
300 μm, 500 μm Si and 1000 μm CdTe
71 mm x 57 mm
Number of Pixels:
1280 x 1280
Threshold Step Resolution:
0.8 keV (THL) and 2 keV (ToT)
Min Detectable Energy:
5 keV for X-rays
Photon Counting Speed:
up to 3 x 106 photons/s/pixel
Pixel Mode of Operation:
Counting, Time-over-Threshold, Time-of -Arrival
130 mm x 103 mm x 54 mm (L x W x H)