WIDEPIX L 2(1)X10 MPX3
Wide 2(1)x10 - MPX3 camera consists of either 2x10 or 1x10 Medipix3 devices. Each pixel has two integrated 12-bit digital counters and two energy discrimination thresholds. Both counters can be joined to a single 24-bit counter providing enhanced dynamic range. The camera can be constructed with Si or CdTe edgeless sensor tiles. The edgeless sensor technology allows placing all tiles tightly together from all sides. Thus the whole imaging area of the camera is fully sensitive to the radiation - there are no gaps between the tiles in the image. The camera is made robust to address industrial users.
The Wide 1x10 - MPX3 camera offers high speed built-in Time-Delayed-Integration (TDI) for scanning in industrial applications. Two Ethernet RJ-45 connections allow high frame rate up to 170 fps and scanning speed up to 1.5 m/s.
Wide 2(1)X10 - MPX3 is available with Si and CdTe sensors for imaging of the soft and hard X-ray spectrums, respectively.
The minimum detectable energy is typically 4 keV or 5 keV in case of Si or CdTe sensor, respectively. The intrinsic spatial resolution of the camera is defined by pixel size which is 55 µm. The pixels situated on the border of tiles are 2 times larger in one direction. The corner pixels of tiles are 2 times larger in both directions.
Model WIDEPIX L 2(1)X10 MPX3
Si or CdTe
300 μm for Si; 1 mm for CdTe
28 (14) x 140.8 mm
Number of Pixels:
512 (256) x 2560
170 (1x10 tiles) and 80 (2x10 tiles) frames/s
Yes, hardware based (1x10 tiles), 1.5 m/s
Thresholds per pixel:
1 or 2
Threshold Step Resolution:
0.7-2.0 keV (Si) and 1.2-3.6 (CdTe)
Min Detectable Energy:
4 keV (Si) and 5 keV (CdTe)
Pixel Mode of Operation:
Counting in Single Pixel Mode (SPM) or Charge Summing Mode(CSM)
12 or 24 bits (configurable)
2x Ethernet RJ-45
210 mm x 190 mm x 42 mm (L x W x H)